All In One Hdd Docking Station Driver

2.5/3.5' SATA IDE HDD Docking Station Clone USB 2.0 HUB
Quick Overview:
All-in-One item: HDD Dock can accommodate/store/exchange/backup 1x 2.5'/3.5' SATA and 1x IDE hard drives; USB 2.0 interface enables data transfer rates up to 480 Mbps; MS/M2/XD/CF/SD/TF card reader; 2 ports USB 2.0 HUB.
Features:
Supports both 2.5'/3.5' SATA and IDE hard drives.
Spports a 2.5'/3.5' SATA and a IDE hard drives simultaneously.
With a USB 2.0 interface for data transmission.
Supports USB 2.0 hi-speed (480Mbps) and full-speed (12Mbps) operation.
Any hard disk data (such as OS, driver, AV files and so on) cloning function.
Software backup function.
Supports One Touch Backup (OTB) function.
Hot swappable and pluggable for most operation systems (Win 98/ME/2000/XP/Vista/Win 7, Mac OS 9.X/10.X, Linux).
Plug and Play.
2 ports USB 2.0 Hub.
MS/M2/XD/CF/SD/TF card reader.
Includes a universal power adapter (12V 5A).
Compact and lightweight.
Specifications:
HDD supported: 2.5'/3.5' SATA and IDE
HDD capacity: Up to 2TB
Interface: 1 x USB 2.0, 2 x USB Hub, 1 x XD, 1 x MS, 1 x SD, 1 x CF, 1 x M2, 1 x TF
Power supply input: 100~240V, 50~60hz
Power supply output: 12V, 5A
Plug standard: Type B (as shown in the pictures)
OS supported: Win 98/ME/2000/XP/Vista/Win 7, Mac OS 9.X/10.X, Linux
Color: Black and Red
Product dimensions: 134x103x65mm
Product weight: 236g
Package dimensions: 160x130x120mm
Package weight: 673g
Package Includes:
1 x Multifunction SATA IDE HDD Docking
1 x Power Supply
1 x USB Cable
1 x Power Cable
1 x Driver CD
1 x User Manual

• All In One Docking Station
• All In 1 Hdd Docking Station Driver Windows 10
• All In 1 Hdd Docking Manual

I have an All-in-one docking station, model #(wlxkj 875). It takes both IDE and SATA 3.5 and 2.5 hdds. There is also a built-in multicard reader. All in One HDD Docking Drivers All in One HDD Docking Drivers This is a plug and play device, and only Windows 2000 and earlier operating systems may require a driver, whilst operating systems from Windows 2000 onwards do not require a special driver. Windows 98, SE (Driver required). Dual sata hard drive docking station 2 5 3 hdd all in 1 hdd docking station driver windows 10 about dock photos insignia 2 bay hdd docking station ns pchdeds19 best.

You are not required to install a driver, unless your computer operating system is Windows 2000 or earlier.

Make sure you have installed a hard drive in the relevant slot, connected the power supply and USB cables, and then switch the unit ON. Usually, the computer automatically detects a mass storage device connected to the USB port and loads the necessary drivers.

There is an accompanying CD with software, which is required only if you wish to use the one touch backup and cloning functionality. You do not need to install the software in this CD, if all you will be doing is accessing the drive as a mass storage device.

Stata 8 software, free download. As you can see, the printed circuit board (PCB) has plug connectors for the IDE and power ports, which mate with their respective counterpart connectors on the hard disk. It is therefore a simple matter of aligning the drive and plugging it in. Click on the image above to see exactly where a PC hard disk would connect.

Power Connectors

Turn over the hard drive so that the Molex power connectors on the drive and the dock station are on the same side.

Desktop Hard Disk Position

A desktop hard disk such as PATA will connect in the centre.

If the power connectors align and mate properly, then the IDE connector will follow and align as well. The docking station connector usually ignores the pins for the jumper settings and they do not connect to anything.

Maxtor DiamondMax 21

I am using the Maxtor DiamondMax 21 hard drive, which also came from eBay as a refurbished drive. Chatrak mushroom movie download. Teamviewer 12 trial expired fix. It seems to be operating fine with this docking station.

Installing the Hard Drive

Very gently align the drive to mate with the sockets on the dock station, and then apply a small amount of force so that the connectors join and make an electrical connection.

Connecting the Wires

After seating the drive into the dock station, connect the power supply and USB cables, and switch ON the dock station. When you switch it ON, your computer will automatically detect the device connected to the USB port and install the necessary drivers. In 'My Computer', you should see a 'Removable Drive' icon.

This Article Continues..

All In One Docking Station

All In 1 Hdd Docking Station Driver Windows 10

Installing the Hard Drive

Very gently align the drive to mate with the sockets on the dock station, and then apply a small amount of force so that the connectors join and make an electrical connection.

Connecting the Wires

After seating the drive into the dock station, connect the power supply and USB cables, and switch ON the dock station. When you switch it ON, your computer will automatically detect the device connected to the USB port and install the necessary drivers. In 'My Computer', you should see a 'Removable Drive' icon.

This Article Continues..

All In One Docking Station

All In 1 Hdd Docking Station Driver Windows 10

All In 1 Hdd Docking Manual